Sunday, November 27, 2016

St Thomas Freight House Part III

So we've been flinging paint and sticking down shingles.
The walls got a coat of Scalecoat CNR Red #11. The roof and the back got a coat of coach green, and the platform top was given a coat of Floquil Foundation.
The Foundation was allowed to cure for a couple of days.


With the Foundation well cured, out came the oil colours. The first pass was with Burnt Umber. The intensity was varied as it was applied along the platform. I just use a piece of styrene as a palette and splash some Turpenoid onto it. With the brush a drag a little colour into the Turpenoid and make a kind of a wash. The key here is to vary the intensity and not to overwork the paint. Let that dry.
Then a pass was made with Burnt Sienna. The idea is to get a variety of browns happening. The transparency of the oils is working to our advantage here.
The last pass was with Lamp Black. I'm going to let that dry and look at it again in a couple of days. I can come back and add more browns and/or black if  I wish. But for now I'm satisfied.
I had spent a whole day the previous day applying Builders in Scale shingles. Turns out I had more in my stash than I had first thought, but sadly not quite enough. There's about 3/8" at the top missing shingles. Good thing I ordered more last week.

So for now, we're calling it done. I can now add ground cover around the base and think about other yard structures.
This was a fun little project and it's kinda got me thinking about the station proper.


This guy will be a tad more challenging. Bunting or no bunting.



1 comment:

Jim Dick said...

I like the way this turned out. I was very much thinking of doing a "compressed" aisle side structure in the same manner. Now that I see yours, it strengthens my resolve that I can place structures in the same manner.